Jump to content
Sign in to follow this  

Tips to Optimize HP QTP 11.0 Scripts to Yield Better Performance

Recommended Posts

We use Automated-testing tools to optimize our manual testing processes. But in order to reap full benefits of any automated testing tool, we must know the complete ins and outs of the tool otherwise it would be a huge waste of money spent on automation. We have to learn the automation tool very thoroughly. We also need to learn the language of the automation tool to do coding more effectively and efficiently. I believe that a software testing tool is as good as the person who is actually using it. I have been getting so many emails from my esteemed readers asking about HP QuickTest Professional tutorials, QTP tips and tricks etc. Some readers even complain that their QTP scripts are too slow to execute. This time I decided to write a post on how to use QTP more effectively which means how to make our QTP scripts perform better. In order words, this post will throw light on some points, which will optimize your QTP scripts. Some of the QTP optimization tips can be:Tip – 1: You should not use hard coded wait statement until absolutely necessary. Instead of the wait statement, you should use either exist or synchronization (sync) statements. The wait statement waits for the number of seconds, which have been provided. For example using wait(5) will wait for 5 seconds even if the browser gets into a ready state even after 2 seconds which means a waste of 3 seconds. Imagine how much time would be wasted if you have say 10 wait statements per script and you are running a batch of 500 scripts. A better alternative is using sync or exist statements for example:Browser("").Page("").Syncvar=Browser("").Page("").Exist(2)Never use the exist statement without a value as it will take the default object synchronization timeout value from QTP settings. You can navigate to these settings from File->Settings and then go to Run tab. So use Exist(0) instead of Exist(10). Moreover, I will suggest to set the global object synchronization timeout to 1 second.Tip – 2: Use declared variables instead of using variables on the fly. In order to enforce this in your scripts, use Option Explicit statement which forces the variable declaration. Moreover, using declared variables, scripts perform a bit faster. Also if you are using Option Explicit, it has to be the very first line of the code otherwise you will get an error.Tip – 3: Using QTP for a longer period of time has a direct impact on the performance. It has been observed that a lot of Random Access Memory(RAM) gets consumed by QTP if QTP is running scripts for prolonged time. QTP starts eating system memory(memory leak) and sooner or later it will get hanged and we will be required to kill the qtpro.exe process and restart QTP all over again. In such a case, I will suggest you is to use QTP on computers with particular good amount of RAM and equally good clock speed.Tip – 4: Do not load all addins while opening QTP. Use only the addins, which are required. This directly impacts QTP performance.Tip – 5: I have personally experienced that opening QTP through a vbs file is faster than loading QTP through the icon.Tip – 6: Switch to fast run mode. You can view this option in Tools->Options->Run. In fast mode, QuickTest Professional does not display the execution marker. In case you are running your scripts from Quality Center or QC, by default they will be run through fast mode. Tip – 7: Disable the Smart identification feature.Tip – 8: Switch off the video record option unless required as it will require fewer system resources. You can see this Option in QTP by navigating here Tools->Options->Run.Tip – 9: Use of Active screen feature should be avoided, so that we increase QTP Tool performance.Tip – 10: Instead of keeping the entire code in the same script, try to increase modularity by creating reusable components (Actions or functions) so that the code size can be reduced and also easier to maintain. To disable Action screen in QTP 11, go to Tools->Options->Active Screen and set the capture level to "None".Tip – 11: Destroy the objects when you no longer need them. As objects take up relatively large amount of system resources, it is better to destroy them when you don’t need them anymore. For example, please refer the following code:Set objFSO = CreateObject("Scripting.FileSystemObject")Set objRootFolder = objFSO.GetFolder("C:\")Set objFSO = NothingMsgbox "The folder was last modified on :"& objRootFolder.DateLastModifiedSet objRootFolder=NothingNotice from the above code that we need objFSO code just to retrieve the handle of "C" folder. As soon as you get the handle, you no longer need the objFSO folder. So instead of destroying this object reference at the last line, you should destroy when you don’t need the object reference anymore. You should follow the principle of limiting object lifetime as much as possible. Tip – 12: Creating an object reference increases the performance. For example, please refer the following QTP code:oEdit = Browser("Google").Page("Google").WebEdit("q")oEdit.Set "Optimize QTP Scripts"'The above code is definitely better in terms of performance than using the QTP code:Browser("Google").Page("Google").WebEdit("q").Set "Optimize QTP Scripts"You will not see major performance difference in this two liner code. To see a noticeable difference, you need to have hundreds of lines of QTP where you will see the difference. The reason is setting an object reference reduces the call to the Object repository.Tip – 13: I have also seen that using With statement in HP QTP increases performance but only upto a very small extent. In order to add With statement from QTP IDE, navigate to Tools->Options->General tab and select the option “Automatically Generate “With” statements after recording” option. Tip – 14: Having too many objects in the Object repository/shared object repository slows down the QTP scripts. So the best option is to have only the desired objects in the Object Repository.Tip – 15: Use local variables in functions rather than using global variables. The best practice is to limit the scope of a variable as much as possible.Tip – 16: Try to make sure that your QTP code does not wait for events, which have already been executed. For example see the below QTP code:iTimer = TimerobjWindow.Close Do If Dialog("micclass:=Dialog").Exist(0) Then _ Dialog("micclass:=Dialog").Type MicEsc Loop Until (Not objWindow.Exist) Or (Timer-iTimer>20)Instead of having a loop which will wait for 20 seconds for an event to occur, you should have a loop similar to the above. This loop will continue to loop until either of the condition is met: Either the timer has crossed 20 seconds or the window no longer exists.I hope the above article has touched lot many QTP optimization tips. I don't claim to be an expert on QTP, however I have made an attempt to share the above tips based upon my experience with this great tool. Please feel free to add some points in the comment section if I happen to miss any. I will be glad to update this article giving appropriate credit to the people.

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this